PURPOSE This MSS Standard Practice establishes requirements for copper alloy gate, globe, angle, and check valves used in applications with connections and connected to materials which will not support the pressures and temperatures of applicable ANSI-approved Class standards and the requirements of MSS SP-80. 1. SCOPE 1.1 Scope This Standard Practice establishes requirements for copper alloy gate, globe, angle and check valves for plumbing and othe rpurposes where a non-Class, CWP pressure and temperature rating is sufficient. This Standard Practice provdes requirements for the following: a) Pressure-Temperature Ratings b) Materials c) End Connections d) Dimensions e) Markings f) Testing and Inspection 1.2 References Standards and specifications adopted by reference in this standard and names and addresses of the sponsoring organizations are shown in Annex A. It is not considered practical to refer to a specific edition of each of the standards and specifications within the individual references herein. Instead, the specific edition references are included in Annex A. A product made in conformance with th eedition reference applicable during the time of manufacture, and in all other respects conforming to this standard, will be considered to be in conformance even though the edition reference may be changed in a subsequent revision of this standard. 1.3 Description